Charging status in the car's driver display
The driver display shows the status for charging with both image and text. The information is shown for as long as the driver display is operating.
| Image | Message | Specification |
|---|---|---|
 | Fully charged at: [Time] is shown together with an animation with blue pulsating light through the charging cable. | Charging continues and an approximate time for when the batteries are estimated to be fully charged is shown. |
 | The text Charging complete is shown. An illustration of the car is shown with an LED indicator at the charging input socket that illuminates in green. | The batteries are fully charged. |
 | The text Charging error is shown. The LED indicator at the charging input socket illuminates in red. | A fault has occurred, check the connection of the charging cable to the car's charging input socket and to the 230 V socket1 (alternating current). |
Note
If the driver display is not used for a while then it is dimmed. Reactivate the display by means of one of the following:
- depress the brake pedal
- open one of the doors
- set the car in ignition position I by turning the START knob clockwise and releasing.