• Manual
  • Video gallery
  • Software updates

Using the stored seat and door mirror positions

If the positions for the power seat and door mirrors have been stored, they can be activated using the memory buttons.1

Using a stored position

PS2- 20w07- Memory functions front seat door

To use a stored position, press and hold one of the memory buttons 1 (PS-Icon circle 2) or 2 (PS-Icon circle 3) until the seat reaches the stored position.

Releasing the memory buttons will stop the movement of the seat and door mirrors.

 Warning

  • Because the driver's seat can be adjusted with the ignition off, children should never be left unattended in the vehicle.
  • Movement of the seat can be STOPPED at any time by pressing any button on the power seat control panel.
  • Do not adjust the seat while driving.
  • The seat should be adjusted so that the brake pedal can be depressed fully. In addition, position the seat as far rearward as comfort and control allow.
  • The seat rails on the floor must not be obstructed in any way when the seat is in motion.
  1. 1 The last position was saved automatically in the active user profile and is used the next time the same profile is used again.