• Manual
  • Video gallery
  • Software updates

Using electrical sockets

The 12 V socket can be used for various accessories designed for this, such as cooler boxes.

In order for the socket to supply current, the car must be in Comfort or Drive mode.

The socket is switched off automatically when the driver leaves the car. If the car remains unlocked or is locked with reduced alarm level, the socket is active for approximately a further 10 minutes.

 Note

Accessories that are connected to the electrical socket may be activated even when the car's electrical system is disconnected or if preconditioning is used. For this reason, disconnect contacts when not in use.

 Warning

  • Do not use accessories with large or heavy connectors - they can damage the socket or come loose when driving.
  • Do not use accessories that can cause interference to the car's radio receiver or electrical system for example.
  • Position the accessory so that it is not at risk of injuring the driver or passengers in the event of heavy braking or collision.
  • Keep an eye on connected accessories as they can generate heat that can burn passengers or the interior.

Using 12 V sockets

Fold down the cover in front of the socket and connect the plug for the accessory.
Disconnect the plug for the accessory and fold up the cover when the socket is not in use or is left unsupervised.

 Important

The maximum power takeoff is 120 W (10 A).

 Warning

  • Only use accessories that are undamaged and fault-free. The accessories must have a CE marking, UL marking or an equivalent safety marking.
  • Never allow sockets, connectors or accessories to come into contact with water or other liquids. Do not touch or use the socket if it appears to be damaged or has come into contact with water or other liquid.
  • Do not connect junction sockets, adapters or extension cables to the socket as these can override the socket's safety features.

Failure to follow the advice given above can lead to severe or fatal electric shocks.

Related articles