• Manual
  • Software updates

Opening the bonnet

Opening the bonnet requires pulling two separate release levers and provides access to the front storage compartment. Be sure to close the bonnet again before driving the car.

Locations of release levers

Interior bonnet lever location
The interior lever as seen from the driver's seat.

The first lever can be found below the dashboard on the driver's side, just in front of the door hinge.

Exterior bonnet lever location
The second lever is below the front edge of the bonnet on the driver's side.

Releasing the bonnet

Pull back the bonnet lever inside the car.

Directions on using the interior lever.
The bonnet releases from its fully locked position. It opens slightly, which gives you access to the second lever.

Pull the lever below the front edge of the bonnet.

Top view of the exterior lever. The bonnet has been removed in the illustration to help show the lever and how to pull it.
The bonnet releases fully.
Lift the bonnet by its front edge and open it to its fully extended height.
The bonnet stays in position.

 Note

The car notifies you if it detects that the bonnet is not completely closed. Open the bonnet and check for obstructions before closing it again. Contact Polestar Customer Support if the notification remains.

 Warning

Stop the car immediately if there is any indication that the bonnet is not completely closed.

Related articles